First of all you may ask… why should I flush my water heater?

Small accumulations of sediment inside the tank may accumulate over time. The sediment although not a serious problem, can interfere with the functioning of the drain valve, increase the amount of dissolved minerals in the hot water, and affect the efficiency of the lower heating element if allowed to accumulate.

Here is a simple step by step guide from www.thisoldhouse.com
1. Turn off electricity and water to the water heater; allow heater to cool.
2. Drain water from the heater’s tank using a garden hose and pump.
3. Catch drained water in a bucket for inspection.
4. If water is filled with sediment, refill heater and drain again.
5. Continue to fill and drain heater as often as necessary until the water runs clear.
6. Disconnect the hose and pump.
7. Turn on the electricity and water to the water heater.

Here is a link to their short video as well: Click Here

http://www.rusticgirls.com

One Response to “How to Flush Your Water Heater… and why!”